Can one Horizon City layout include pallet and cantilever rack?

Yes, but their handling approaches need separate checks. Horizon City contractor stock may include pallets and long bundles; we place each storage type around its load dimensions and the room needed to turn.

How do you use a 20 ft clear steel building?

For Horizon Industrial Park units, measured clearance and the tallest loaded pallet set the beam-level plan. The forklift must still place the load at the highest proposed position without exceeding its rated capacity.

Do planned Eastlake buildings need a different drawing?

A planned Horizon City office/warehouse should be laid out from its own dimensions and operating requirements. We do not assume a new building will have the same clearance, doorway arrangement or stock mix as an existing unit.

Pallet Rack in Horizon City, TX

Name: El Paso Pallet Rack
Address: 221 N. Kansas Street, Unit F, El Paso, TX, 79901, US
Telephone: (915) 284-6935

We design pallet racks in Horizon City for contractor supplies, trucking stock and small warehouse operations. Warehouse racking and long-material supports are planned together so full pallets and bundles each have a workable loading approach. Horizon Industrial Park follows Darrington Rd and Kenazo Ave, with M-1 lots and older pre-engineered steel buildings around 20 ft clear. Contractor, trucking and supply businesses in this setting often need both pallet positions and open-front storage for long materials. Along Eastlake Blvd and N. Kenazo, a 150-acre shovel-ready industrial tract is master-planned for about 2.1 million SF of office/warehouse space. We treat those planned buildings separately from the existing park rather than implying they are already occupied warehouses.

Cantilever and Pallet Racks for Horizon City Supplies

Cantilever rack arms suit long items when the load can be supported at measured intervals. In a Darrington Rd supply building, list lumber, pipe or other bundled stock by length and total bundle weight before deciding arm spacing. Palletized cartons belong on a rack designed for their footprints and handling method. Combining the two storage types can reduce unnecessary reshuffling, provided their approaches do not conflict. The drawing should show how a forklift carries a long load through a turn, not just where the material rests once it reaches the arms.

Pallet Racking Within 20 ft Clear Height

Horizon City's older steel buildings should be measured before beam levels are selected. The pallet racking cannot use every foot of the advertised clearance because loaded pallets and handling space must fit above each beam. Check the forklift lift height and its capacity at elevation, especially for heavy contractor supply pallets. In a small or mid-size unit, grade-level receiving and inventory staging may share limited space. Place the busiest pallet positions where they can be reached without driving through a long-material loading area. Keep replenishment movement visible on the plan.

Warehouse Racking Along the Eastlake Approach

Eastlake Blvd and Horizon Blvd connect Horizon City to I-10 about seven minutes away, within the growing Far East industrial corridor. The warehouse racking arrangement should match the operating building, whether a business is working inside Horizon Industrial Park or planning a new Eastlake space. For a move, compare both footprints before relocating inventory so the new row lengths and aisles are established in advance. Hot, dry summers affect installation crews in non-air-conditioned structures. Spring wind and dust also matter when rack bundles or cantilever loads are staged in an outdoor yard.

Horizon City Pallet Rack Installation Planning

For Horizon City planning, a stock list should distinguish full pallets from long materials and smaller hand-picked items. Provide doorway dimensions, usable clearance and the equipment used to carry the longest load. We can compare a combined pallet-and-cantilever arrangement with a plan that keeps those functions in separate areas. The pallet racking scope then needs beam loading, arm loading and the intended storage groups identified. If new Eastlake space replaces an older park unit, start from the destination footprint rather than carrying over the old row lengths without checking them. Darrington Road stock should be grouped by handling method before row placement is decided. Kenazo Avenue businesses may need room for both long bundles and pallet reserve. For Eastlake planning, confirm the actual building information as it becomes available. The resulting drawing should distinguish usable storage height from the total advertised envelope and connect each material group to a clear retrieval approach.

Connect the Rack Plan to Your Next Move

For Horizon City, TX, compare selective pallet rack, pushback storage, pallet flow, drive-in lanes, cantilever supports and carton flow picking with the requirements of your Horizon City, TX building. If Horizon City, TX storage is moving, coordinate the layout through our warehouse relocation service.

Warehouse Racking Questions for Horizon City

Plan Your Warehouse Storage

Pallet sizes. Load weights. Clear height. Forklift reach.

(915) 284-6935