--- title: "Pallet Rack in Clint, TX | El Paso Rack" url: https://elpasopalletrack.com/service-area/clint description: "Pallet rack planning and installation in Clint, TX. Call for a layout matched to your loads, lift equipment and working aisles." lang: en --- # Pallet Rack in Clint, TX We quote and install pallet racks in Clint for large cross-dock warehouses, reserve inventory and case-picking areas. Our industrial pallet racks are laid out around replenishment paths and forklift reach, not just a big building footprint. Clint's newest Far East industrial settings include West Texas Logistics Center at Gateway Blvd W and Darrington Rd/N. Eastwind Ave. This master-planned Class A park has 36 ft clear cross-dock buildings ranging from 400,000 to more than 580,000 SF. El Paso Lower Valley Commerce Center adds a 140-acre industrial site at N. Loop Dr and Anderson Rd, with I-10 visibility and room for footprints up to 1.8 million SF. Those building scales make travel paths and replenishment routes as important as the total number of rack positions. ## Pushback and Picking for Clint Reserve Stock Pushback rack can concentrate multiple pallets of the same item behind one aisle face, which is useful for reserve stock that does not require arrival-order retrieval. Pick-module planning starts with order lines, case sizes and replenishment quantities rather than a generic bay count. In a Clint big-box operation, frequent case picking may need a different zone from full-pallet cross-border dispatch. Define the handoff between reserve pallets and the pick face. We compare storage depth with access requirements before deciding whether selective rows, pushback lanes or a combination suits the inventory. ## Pallet Racking With Short Working Routes Large-scale selective pallet racks gives Clint distribution operations direct pallet access across many items. The challenge is arranging rows so receiving, storage and shipping do not create repeated long travel loops. Cross aisles should connect the parts of the building that exchange stock, while dispatch staging remains separate from reserve storage. For a 36 ft clear cross-dock plan, verify loaded pallet height and truck reach at each beam elevation. Do not add another level simply because the building has height available; the load and the equipment must both work at that position. ## Warehouse Racking for Two Border Approaches Industrial land along FM 1110, Clint Cutoff Rd, lies about one mile from I-10, roughly 12 miles from Ysleta-Zaragoza and 14 miles from the Tornillo port of entry. A warehouse serving those approaches needs a place for loads awaiting their next movement without blocking the pallet racking aisles. On the rack drawing, distinguish stock held for later orders from pallets assembled for departure. In El Paso's desert summer, arrange rack delivery staging and installation activity around afternoon heat. Keep active shipping travel separate from the installation area so operating inventory can remain reachable. ## Quoting Pallet Rack Installation in Clint Bring the Clint building plan, column grid and inventory profile to the warehouse consultation. Mark which items feed case picking, which leave as full pallets and which occupy reserve lanes. The warehouse racking drawing should show those connections in addition to beam levels and storage depth. For phased installation in a large building, agree on the active zone and the assembly zone before the first inventory transfer. A relocation scope should explain when each new row becomes available and which stock group is assigned to it. At Lower Valley Commerce Center, future footprint possibilities should not replace the measurements of an operating Clint building. Darrington corridor storage can combine several retrieval methods within one plan. Identify the stock allocated to each method and show the transition between pallet reserve and case picking. The layout comparison should make working travel visible alongside the count of available storage positions. ## Connect the Rack Plan to Your Next Move For Clint, TX, compare selective pallet rack (https://elpasopalletrack.com/products/pallet-rack), pushback storage (https://elpasopalletrack.com/products/pushback-rack), pallet flow (https://elpasopalletrack.com/products/pallet-flow-rack), drive-in lanes (https://elpasopalletrack.com/products/drive-in-rack), cantilever supports (https://elpasopalletrack.com/products/cantilever-rack) and carton flow picking (https://elpasopalletrack.com/products/carton-flow-rack) with the requirements of your Clint, TX building. If Clint, TX storage is moving, coordinate the layout through our warehouse relocation service (https://elpasopalletrack.com/warehouse-relocation). ## Warehouse Racking Questions for Clint ### What comes first in a Clint cross-dock layout? ### Where can pushback help West Texas Logistics Center inventory? ### What should a pick-module brief include? ## Plan Your Warehouse Storage Pallet sizes. Load weights. Clear height. Forklift reach. (915) 284-6935: 9152846935 Call Now: 9152846935 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://elpasopalletrack.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Areas", "item": "https://elpasopalletrack.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Clint, TX", "item": "https://elpasopalletrack.com/service-area/clint" } ] }, { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://elpasopalletrack.com/#business", "name": "El Paso Pallet Rack", "alternateName": "El Paso Pallet Rack — A Division of Warehouse Equipment & Supplies Co.", "url": "https://elpasopalletrack.com", "telephone": "(915) 284-6935", "address": { "@type": "PostalAddress", "streetAddress": "221 N. Kansas Street, Unit F", "addressLocality": "El Paso", "addressRegion": "TX", "postalCode": "79901", "addressCountry": "US" }, "hasMap": "https://maps.google.com/maps?q=221%20N.%20Kansas%20Street%2C%20Unit%20F%2C%20El%20Paso%2C%20TX%2079901&z=17&output=embed", "areaServed": [ { "@type": "City", "name": "El Paso, TX" }, { "@type": "City", "name": "Santa Teresa, NM" }, { "@type": "City", "name": "Socorro, TX" }, { "@type": "City", "name": "Las Cruces, NM" }, { "@type": "City", "name": "Horizon City, TX" }, { "@type": "City", "name": "Clint, TX" }, { "@type": "City", "name": "Sunland Park, NM" }, { "@type": "City", "name": "Montana Vista, TX" }, { "@type": "City", "name": "Anthony, TX" }, { "@type": "City", "name": "Vinton, TX" }, { "@type": "City", "name": "Canutillo, TX" }, { "@type": "City", "name": "Anthony, NM" }, { "@type": "City", "name": "Chaparral, NM" }, { "@type": "City", "name": "Tornillo, TX" }, { "@type": "City", "name": "Fabens, TX" }, { "@type": "City", "name": "San Elizario, TX" }, { "@type": "City", "name": "Berino, NM" }, { "@type": "City", "name": "Vado, NM" }, { "@type": "City", "name": "Mesquite, NM" }, { "@type": "City", "name": "Doña Ana, NM" }, { "@type": "City", "name": "Fort Hancock, TX" }, { "@type": "City", "name": "Hatch, NM" }, { "@type": "City", "name": "Alamogordo, NM" } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "What comes first in a Clint cross-dock layout?", "acceptedAnswer": { "@type": "Answer", "text": "We establish receiving, dispatch staging and cross aisles before counting reserve positions. In a large Clint building, row placement must support the actual freight path rather than forcing every movement around long rack runs." } }, { "@type": "Question", "name": "Where can pushback help West Texas Logistics Center inventory?", "acceptedAnswer": { "@type": "Answer", "text": "Clint reserve stock with several pallets per item may fit pushback lanes when last-in, first-out access is acceptable. Mixed or frequently selected pallets generally need more direct access through selective rack." } }, { "@type": "Question", "name": "What should a pick-module brief include?", "acceptedAnswer": { "@type": "Answer", "text": "For a Clint distribution operation, provide case dimensions, order-line activity, replenishment quantities and the connection to reserve storage. That information lets us separate pallet handling from the regular work at the picking face." } } ] } ] ```